Samson MPL 1502 Specifikace stáhnout pdf (Strana 10)

Guided Tour - Rear Panel

1: Power on-off switch - As you may have guessed, this is what you use to

turn the MPL 1502 on and off. To avoid potential damage to your speakers, turn

the mixer on before you turn on any connected power amps—and turn it off after

the power amps are turned off.

2: Phantom switch - When this switch is turned on, the MPL 1502 delivers 48

volts of phantom power to pins 2 and 3 of all XLR microphone connectors (mono

channels 1 - 5).

WARNING: Only turn this on or off with the MPL 1502 powered

down. Use phantom power only when one or more condenser microphones are

connected to the MPL 1502 (these microphones will correctly load the input in

order to “drain off” the phantom power voltage). Before turning phantom power

on, be sure to disconnect all non-microphone signal sources (such as direct

injection boxes) from the XLR mic jacks. Phantom power will generally have no

adverse affect on connected dynamic microphones; however,

we strongly

recommend that you refer to the owners manual of your microphone to

determine whether or not it requires 48 volts phantom power. We cannot

assume responsibility if you damage a mic by incorrectly applying

MPL 1502 phantom power.

If you’re not sure that one or more connected mics

require 48 volts phantom power, leave this switch OFF.

3: AC input - Connect the supplied standard 3-pin “EEC” plug here.

4: Voltage selector - Set this to the left (“115 V”) position for operation in the

United States and Canada. Set this to the right (“230 V”) position for operation

in other countries. This will normally be preset correctly at the factory and will

require no adjustment unless you use the MPL 1502 in a country other than the

one in which you purchased the unit.

OFF

POWER

RIGHT

LEFT/MONO

CHANNEL INSERT - TIP RETURN - RING SEND

MAIN OUT

(BALANCED 600 Ω +4dB)

AUX SEND

(UNBALANCED 2KΩ +4dB)

SAMSON TECHNOLOGIES CORP., HICKSVILLE, NEW YORK

SERIAL NUMBER

ASSEMBLED IN R.O.K.

AVIS:

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

DO NOT EXPOSE THIS EQUIPMENT

TO RAIN OR MOISTURE

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

MPL 1502

15 CHANNEL STEREO MIXER

TIP RING SLEEVE

TIP +

RING -

SLEEVE GND

PHANTOM

48V

RIGHT LEFT

TAPE IN

(10KΩ -10dB)

12345

RIGHT

LEFT/MONO

AUX RETURN

(UNBALANCED 2KΩ +4dB)

115V

230V

VOLTAGE SELECTOR

FUSE RATING

0.3A/250V(115V)

0.15A/250V(230V)

~115/230V,50/60Hz 23W

SAMSON

TAPE OUT

(600Ω +4dΒ)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Komentáře k této Příručce

Žádné komentáře

Samson MPL 1502 Specifikace Strana 10

Komentáře k této Příručce

Související produkty a manuály pro Směšovače zvuku Samson MPL 1502